Wichtige Hinweise:
- Es ist wichtig, ihre Zigarren so genau wie möglich bei 70% Feuchtigkeit zu lagern. Niedrigere Temperaturen verhindern, dass die Lösung verdunstet, während höhere Temperaturen den Humidor schneller austrocknen lässt.
- Winter months or dry climates require diligent maintenance. While the Cylindor is designed to accommodate two humidity packs, you may need to add additional packs to increase the humidity.
- Wir empfehlen Ihren Humidor NICHT an direktem Sonnenlicht zu lagern. Dadurch wird die Luftfeuchtigkeit des Humidors schnell gesenkt.
- We recommend using 69% humidity packs weighing at least 60gm.
Hygrometer Setup:
1. Remove lid from the glass base.
2. Push out the hygrometer from the bottom of the lid.
3. Remove the battery pull tab and reinstall the hygrometer.
Hygrometer Notes:
- You will need to periodically replace the battery in your hygrometer (Battery Type: CR2032).
- Every Klaro hygrometer comes pre-calibrated from the factory, but in the rare case you need to recalibrate, you do so by holding the F/C button for at least 5 seconds.
Seasoning / Setting Up Your New Cylindor
1. First, remove the included humidity pack from the plastic wrap. Next, fold over the edge so it fits tightly in he plastic holder. Note: Depending on the size of the humidity pack, you may have to fold the edges over for it to fit comfortably. Troubleshooting
2. Remove the plastic divider and insert the included humidity pack in the slot.
Hinweis: You may need additional humidity packs in dry seasons or climates. We recommend using 69% humidity packs weighing at least 60gm.
If you aren't able to reach the required humidity or have other questions, please send us a Nachricht, E-Mail, or call or text 317-530-3002
E-Mail: [email protected]
